Good quality plastic corrugated sheet four color printing macine for box making

Group Plastic hollow sheet box making auxiliary machine
Min. Order 1 piece
Terms of Payment L/C, Western Union, MoneyGram, T/T, Paypal
Update Time 2020-09-24
Item specifics
Maximum sheet size2400×1450mm
Minimum machining size(L×W).340*400mm
Printing plate thickness7.2mm
Suitable sheet thickness1.2-12mm
Maximum mechanical speed150pcs/min
Main motor power11kw
Color accuracyfour colors ±0.5mm
  • Description
  • Product review

Tongsan High speed four color printer

Main mechanical properties:

This product can complete the four-color printing, cutting, indentation, trimming, slotting, die cutting and other processes of paperboard at one time. Taiwan roller front positioning automatic paper feeding mechanism, adjustable air volume, main frequency conversion control. This machine adopts PLC and color display screen to control the machine with multi-function, which is convenient, fast and flexible. Phase adjustment through digital display electric adjustment, automatic zeroing, automatic reset; transmission gear adopts 40CrMnTi high quality alloy steel, material Carburizing and quenching, fine grinding; the main transmission gear and transmission shaft are connected by increasing tension and key, so that the virtual position is magnified, the wear of the center is eliminated, and the printing press is kept. Long life overprint accuracy; the whole machine adopts electric separation, pneumatic locking, single machine tight combination, overprint does not leave position; the machine has the characteristics of accurate color, exquisite printing pattern, convenient use and maintenance, high degree of automation and so on.

Sheet feeding partment for PP hollow corrugated sheet printing machine



1,Platform clutch

1) The clutch of the electric control machine shall be attached to the alarm bell, and the alarm shall be continued for alarm to ensure the safety of the working personnel.

2) Pneumatic interlocking device.

3) The main engine motor starts the protection device, when the whole machine is not locked, the main engine can not run.

2,Leading edge roller sheet feeding system


1) Suction auxiliary paper feeding, fan 7.5 kW, according to the different bending conditions of paperboard, do air volume adjustment to ensure smooth paper supply. (valve adjusted air volume)

2) Taiwan roller type front positioning automatic paper feeding mechanism is selected.

3) And the position of the side baffle and the rear baffle box is electrically adjusted.

4) Paper supply counter, set, display production quantity, automatic alarm.

3 dust separation plant

1) Set up brush dust removal device, can remove impurities on paperboard printing surface, improve printing quality.

4 Feeding roll

1) The outer diameter of the feeding roller is 1.136mm, solid steel, wrapped in wear-resistant rubber, and balance correction.

2) The outer diameter of the lower feeding roller is 156mm, embossed hard chromium plating.

3) Manual adjustment of paper roller gap dial, adjustment range 1.2~12mm

5 Automatic zeroing device

1) The sheet  feeding part, the printing part, the electric automatic return-to-zero and the erasing memory.

2) General sheet using automatic zeroing device, erasing memory, trial printing of two can be adjusted to the correct position, reduce cardboard waste.

PP hollow corrugated sheet printing department



1Printing roller

Plate roll

1) OD=Ø444mm

2) Grinding of steel pipe surface with hard chromium plating

3) Balance correction, smooth operation.

4) Ratchet fixed reel shaft.

5) The full version of the hanging plate shall be of 10mm and 3mm hanging strip.

6) With fast plate changing device, loading and unloading printing plate is convenient and fast, with pedal switch electric control forward and reverse turn.

2 Printing roller

1) OD=Ø156mm ,thickness=18mm

2) Grinding of steel pipe surface with hard chromium plating

3) Make balance correction and run smoothly.

4) Manual adjustment range of printing roller clearance dial 1.2~12mm

3 Paper feeding up and down roller

1) Upper roll: the outer diameter is 86mm thick-wall steel pipe, with three outer diameters and 120mm paper feeding rings.

2) Lower roll: outer diameter is 156mm thick-wall steel pipe, surface grinding, hard chromium plating.

3) Manual adjustment of paper roller gap dial, adjustment range 1.2~12mm

4 Steel mesh roller

1) OD=Ø198.8mm,thickness=22mm

2) Steel pipe surface grinding, pressing mesh, hard chromium plating.

3) Make balance correction and run smoothly.

4) The number of mesh is 180200220.250 mesh, etc., optional.

5) Cooperate with the pneumatic automatic lifting device of the paper feeding system (the mesh roller drops in contact with the printing plate during paper feeding, and stops the screen roller rising and printing plate separation during paper feeding).

6) The mesh roller is equipped with a wedged overrunning clutch, which is convenient and quick to wash ink.

5 Rubber roller

1) ID=Ø198.8mm

2) The surface of the steel pipe is coated with wear-resistant rubber and the balance correction is made.

3) The rubber is high in special grinding, and the ink transfer effect is good.

6 Phase adjusting mechanism

1) The structure of the planet gear.

2) The printing phase is adjusted by electric digital 360 °phase meter. (operation, stop can be adjusted)

3) Manually adjust the transverse position and adjust the distance ±7.5mm

4) Automatic memory reset system after cleaning printing plate in printing process

7 Ink circulation

1) The pneumatic diaphragm pump has the advantages of stable ink supply and simple operation and maintenance.

2) Ink filter, filter impurities, ink separation.

8 Printing phase

fixing device

1) Cylinder type automatic brake device

2) When the machine is separated or adjusted, the brake mechanism limits the rotation of the machine and maintains the fixed point of the original gear position.