Tongsan PC wave hollow corrugated sheet solar panels making machine manufacturer price
- Model
- SJ130/36
Item specifics
- Sheet width
- 2100mm
- Sheet thickness
- 4-6mm,8-10mm
- Main extruder
- SJ130/36
- Main motor power
- 250kw
- Extruder capacity
- 400kg/h
- Co-extruder
- SJ45
- Hydraulic screen changer
- 2 sets
- Melt pump
- 1 set
Product review
Description


Ⅰ . General | |
1.Resin and sheet structure | PC, UV granules;A/B/A |
2.Supply power | 380V/3phase /50HZ |
3.Product width after trimming | W=2100mm |
4.Thickness range: | Depends on the die |
5.Max.Output capacity | 400-500 Kg/Hr |
6.Designed Line speed | 0.4-4m/min |
7.Compressed air | 1 M3 / h, 0.5—0.6Mpa |
8.Cooling water(circled water) | 9 M3 / h; |
9.Total power / Average consumption | 745Kw / around 430kw |
10.Direction of Production Line | Left hand ( the downstream is in left direction when facing the line and standing the operation side) |

The high-speed and high-efficiency PC hollow corrugated wave solar panel making machine production line series developed by Qingdao Tongsan Plastic Machinery Co., Ltd. and its special molds are advanced in technology, wide in applicability and stable in performance, depending on the width, thickness, hierarchical structure, hollow shape and plastic materials used. Have the following categories:
1, PC hollow corrugated wave solar panel making machine according to the product width: can be divided into ZKB1400 type, ZKB1860 type, ZKB2300 type, ZKB2600 type unit
2, PC hollow corrugated wave solar panel making machine according to the thickness of the product: can be matched with 2-6mm, 6-12mm, 12-18mm special hollow grid plate mold
3, PC hollow corrugated wave solar panel making machine according to product structure: can be divided into single-layer board, double-layer co-extruded board, multi-layer co-extruded board
4, PC hollow corrugated wave solar panel making machine according to the shape of the product: can be divided into basic type - I type; special type - S type, V type, X type, rice type, etc.
5. PC hollow corrugated wave solar panel making machine use plastic raw materials according to products: high-speed and high-efficiency plastic extruder that can be used for PP, PE, PC and other raw materials.
Line Configuration and sellers supply scope | |
Screw Loader | 2 sets |
Hot air dryer | 2 sets |
Vacuum Loader | 1set |
UW-130/35 single vented screw extruder | 1 set |
UW-45/30 single screw extruder | 1 set |
Hydraulic screen changer | 2 sets |
Melt pump | 1 set |
T-die | According customer requirments |
Calibrator bench with plates | 1 set( 2 stages) |
Thermoregulating Station | 1 set ( 5 units) |
Vacuum Pump Station | 1 set ( 5 units) |
First pull-off | 1 set |
Annealing oven | 1 set |
Cooling bracket | 1 set |
Protective film laminating device | 1 set |
Edge cutters | 1 set |
Second pull-off | 1 set |
Transversal cutter | 1 set |
Belt conveyor | 1 set |
Robotics stacker | 1 set |
Electric control system | 1 complete set |

