- Extruder type
- Conical double screw extruder
- Extruder model
- Raw material
- Waste plastic +wood powder+attitives
- Door frame width
- Main motor power
- Temperature Controller
- Surface treatment
- Laminting or painting
- Production time
- 60-90 days
- pay terms
- 30% down payment +70% balance
- warranty period
- 12 months
PP/PE/PVC wood plastic composite WPC profile making machinePP/PE wpc profile making machine can continuously produce PP/PE WPC profile. Including PP/PE WPC decking floor, PP/PE WPC outdoor wall panel, PP/PE WPC fence , post and so on.
The customer can also use this line to produce PVC WPC window and door profile by changing the screw and mould.
|Recycled PP/PE plastic material||25-30%|
|Wood powder made from wood/rice husk/rice straw/wheat straw/wheat husk||65-70%|
|Chemicals: PE wax, stearic acid, CaCo3, pigments, coupling agent||5%|
The production flow for WPC project as follows:
1.Wood powder machinery(To get drying wood powder):Wood chipper/Wood powder making machine/Wood powder drying machine.
2.WPC mixer(To mix wood powder,plastic and other chemical additives. Get WPC powder)
3.WPC granulating machine(To make WPC powder to WPC pellets)
4.WPC profile making machine(To make different WPC profile by changing the mould).
5.Surface treatment machine(To make surface treatment on the profile).Embossing machine, sanding and brushing machine etc.
6.Recycled machine(To recycle bad products). Plastic crusher.